Capture Spot & Stain Remover 32 oz.

Product ID: 40009
Sale Price: $9.99 Each
Availability: Typically Ships In 5 to 7 Business Days
Manufacturer: Capture
Category: Care / Maintenance

Material Safety Data Sheet
 
Capture Spot & Stain Remover
 
1. PRODUCT AND COMPANY IDENTIFICATION
 
Product Identification
Product Name: Capture Spot & Stain Remover
CAS Number: Blend
 
Company Identification
Milliken Chemical
P.O. Box 817
1440 Campton Road
Inman, SC 29349 USA
1-864-472-9041 (For questions and emergencies)
1-800-424-9300 or 1-703-527-3887 (CHEMTREC)
 
PRODUCT USE:
Cleaner
 
2. HAZARDS IDENTIFICATION
 
EMERGENCY OVERVIEW:
 
Prolonged or repeated contact may cause skin or eye irritation.
 
HFRP Rating:
Health - 1
Flammability - 0
Reactivity - 0
Personal Protection Index - B
   
EYE:
May cause slight irritation.
 
SKIN:
Prolonged or repeated skin contact may cause irritation.
 
INHALATION:
No known risks due to inhalation.
 
INGESTION:
No known hazards when used according to container instructions.
 
3. COMPOSITION / INFORMATION ON INGREDIENTS
 
Chemical Name Amount CAS Number
Proprietary Blend 100.0% Blend
     
 
  
 
4. FIRST AID MEASURES
 
EYE CONTACT FIRST AID:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops or persists.
 
SKIN CONTACT FIRST AID:
Get medical attention if irritation develops or persists.
 
INHALATION FIRST AID:
Although this product is not known to cause respiratory problems, if breathing is difficult, remover to fresh air and provide oxygen.  Contact a physician.
 
INGESTION FIRST AID:
Contact a physician.  Do not induce vomiting.
 
5. FIRE FIGHTING MEASURES
 
FLAMMABLE PROPERTIES:
TCC Flash Point: > 100.0 C (>212.0 F)
Autoignition Temperature: N/A
 
FLAMMABLE LIMITS IN AIR:
LEL: %
UEL: %
 
EXTINGUISHING MEDIA:
Water, carbon dioxide, foam or dry powder.
 
FIRE & EXPLOSION HAZARDS:
No Known unusual hazards in a fire/explosion situation.
 
FIRE FIGHTING INSTRUCTIONS:
As in any fire, wear self-contained breathing apparatus pressure-demand MSHA/NIOSH (approved or equivalent) and full protective gear. 
 
6. ACCIDENTIAL RELEASE MEASURES
 
SAFEGUARDS (PERSONNEL):
Wear appropriate personal protective equipment.
 
SPILL PROCEDURE:
Contain spilled material.  Large spillage should be dammed-off and pumped into containers.  All waste materials should be packaged, labeled, and transported in accordance with all national, state/provincial, and local requirements.
 
INITIAL CONTAINMENT:
Contain spilled material.  All waste materials should be packaged, labeled and transported in accordance with all national, state/provincial, and local requirements.
 
7. HANDLING AND STORAGE
 
HANDLING (PERSONNEL):
Wear appropriate personal protective equipment.  Wash hands thoroughly after handling.
 
STORAGE PRECAUTIONS:
Keep from freezing.  Keep container closed to avoid contamination.
 
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
 
ENGINEERING CONTROLS:
Good general ventilation should be sufficient to control airborne levels.
 
EYE / FACE PROTECTION REQUIREMENTS:
Wear safety glasses.
 
SKIN PROTECTION REQUIREMENTS:
Wear protective gloves to minimize skin contamination.  Wear appropriate personal protective equipment.
 
RESPIRATORY PROTECTION REQUIREMENTS:
Under normal use conditions, with adequate ventilation, no special respiratory protective equipment is required.
 
EXPOSURE GUIDELINES:
No information available.
 
9.  PHYSICAL AND CHEMICAL PROPERTIES
 
FORM: Liquid
COLOR: Clear
ODOR: Mild odor
 
SOLUBILITY IN WATER: Complete
SPECIFIC GRAVITY: 1.00 (Typical) (Water = 1 )
PH: 8.0 Typical
 
10.  STABILITY AND REACTIVITY
 
STABILITY:
This compound is stable at ambient conditions.
 
POLYMERIZATION:
Hazardous polymerization will not occur.
 
INCOMPATILBILITY WITH OTHER MATERIALS:
Avoid contact with strong oxidizing agents.  Keep from freezing.
 
DECOMPOSTION:
Decomposition may produce fumes, smoke, oxides of carbon and hydrocarbons.
 
11. TOXICOLOGICAL INFORMATION
 
 
No information available.
 
12. ECOLOGICAL INFORMATION
 
No information available.
 
13. DISPOSAL CONSIDERATIONS
 
WASTE DISPOSAL:
All waste materials should be packaged, labeled, and transported in accordance with all national, state/provincial, and local requirements.  Uncleaned empty containers should be disposed of in the same manner as the contents.
 
14. TRANSPORT INFORMATION
 
PRODUCT LABEL: Capture Spot & Stain Remover (each)
D.O.T. HAZARD CLASS: Non-Hazardous
 
15. REGULATORY INFORMATION
 
CHEMICAL INVENTORY INFORMATION:
This material or all of its components are listed in the Inventory of Existing Chemical Substances under the Toxic Substance Control Act (TSCA).