Efloors.com FREE SHIPPING Sale!Free Shipping On Area Rugs!Free Samples!Yellow Tag Sale Event
You are here: Capture Soil Release Pre-Mist 24 oz.

Capture Soil Release Pre-Mist 24 oz.

Capture Soil Release Pre-Mist 24 oz.

Product ID: 40008

Availability: Typically Ships Next Business Day
Regular Price: $14.99
SALE PRICE:
$7.99EACH
Click to chat
Quantity:
EACH
Category: Care / Maintenance
Manufacturer: Capture

Material Safety Data Sheet
 
Capture Soil Release Pre-Mist
 
1. PRODUCT AND COMPANY IDENTIFICATION
 
Product Identification
Product Name: Capture Soil Release Pre-mist
Chemical Family: Surfactant Blend
CAS Number: Blend
 
Company Indentification
Milliken Chemical
P.O. Box 817
1440 Campton Road
Inman, SC 29349 USA
1-864-472-9041 (For questions and emergencies)
1-800-424-9300 or 1-703-527-3887 (CHEMTREC)
 
PRODUCT USE:
Cleaner
 
2. HAZARDS IDENTIFICATION
 
EMERGENCY OVERVIEW:
The health hazards of this product should be low under normal industrial and commercial uses.
 
HFRP Rating:
Health - 1
Flammability - 0
Reactivity - 0
Personal Protection Index - B
 
NFPA Rating:
Health - 1
Flammability - 0
Reactivity - 0
Special Hazard - None
 
EYE:
May be slightly irritating. Not known to cause permanent injury to eye tissue.
 
SKIN:
Non-irritating to the skin.
 
INHALATION:
No information regarding inhalation available. No known hazards when used according to container instructions.
 
INGESTION:
Essentially non-toxic.
 
COMPOSITION / INFORMATION ON INGREDIENTS
 
Chemical Name Amount CAS Number
Confidential Ingredient 0.3% Trade Secret
WATER 95.0-99.0%  
Cleaning Solution (Non-Ionic Surfactant)
<5.0%
 
4. FIRST AID MEASURES
 
EYE CONTACT FIRST AID:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops or persists.
 
SKIN CONTACT FIRST AID:
Wash affected area with large amounts of soap and water. Get medical attention if irritation develops or persists.
 
INHALATION FIRST AID:
Although this product is not known to cause respiratory problems, if breathing is difficult, remove to fresh air and provide oxygen. Get medical attention if cough or other symptoms develop.
 
5. FIRE FIGHTING MEASURES
 
FLAMMABLE PROPERTIES:
COC Flash Point: None
TCC Flash Point: None
Autoignition Temperature: N/A
 
FLAMMABLE LIMITS IN AIR:
LEL: N/A
UEL: N/A
 
EXTINGUISHING MEDIA:
Water, carbon dioxide, foam or dry powder. Use water spray to cool fire exposed containers.
 
FIRE & EXPLOSION HAZARDS:
No Known unusual hazards in a fire/explosion situation.
 
FIRE FIGHTING INSTRUCTIONS:
As in any fire, wear self-contained breathing apparatus pressure-demand MSHA/NIOSH (approved or equivalent) and full protective gear.  Contain runoff water.
 
6. ACCIDENTIAL RELEASE MEASURES
 
SPILL PROCEDURE:
Clean up area by absorbent material.  All waste materials should be packages, labeled, and transported in accordance with all national, state/provincial, and local requirements.
 
INITIAL CONTAINMENT:
Contain spilled material.  All waste materials should be packaged, labeled and transported in accordance with all national, state/provincial, and local requirements.
 
7. HANDLING AND STORAGE
 
HANDLING (PERSONNEL):
Avoid prolonged contact with skin or eyes.  Wash hands thoroughly after handling.
 
STORAGE PRECAUTIONS:
Keep container tightly closed. Avoid extreme temperatures.
 
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
 
ENGINEERING CONTROLS:
Good general ventilation should be sufficient to control airborne levels.
 
EYE / FACE PROTECTION REQUIREMENTS:
Where contact with this material is likely, chemical goggles are recommended.
 
SKIN PROTECTION REQUIREMENTS:
When prolonged or frequently repeated contact could occur, use protective clothing impervious to this material.
 
RESPIRATORY PROTECTION REQUIREMENTS:
Under normal use conditions, with adequate ventilation, no special respiratory protective equipment is required.
 
EXPOSURE GUIDELINES:
No information available.
 
9.  PHYSICAL AND CHEMICAL PROPERTIES
 
FORM: Thin liquid
COLOR: Colorless
ODOR: Slight, sweet odor
BOILING POWDER: 100 C
VAPOR DENSITY: > 1 (Air = 1)
SOLUBILITY IN WATER: Complete
SPECIFIC GRAVITY: 1 (Water = 1 )
BULK DENSITY: N/A
MELTING/FREEZING POINT: 0 C
PH: 4.5 - 7.5
% VOLATILES: 95-99 % @ 100 C
VOLATILE ORGANIC COMPOUNDS (VOC): None
 
10.  STABILITY AND REACTIVITY
 
STABILITY:
This product is stable at ambient conditions.
 
POLYMERIZATION:
Hazardous polymerization will not occur.
 
DECOMPOSTION:
Decomposition will not occur if handled and stored properly.
 
11. TOXICOLOGICAL INFORMATION
 
TOXICOLOGICAL TESTING:
The primary eye irritation in rabbits for this material was determined to be not a primary eye irritant.
The acute oral toxicity (LD50) in rats for this material wad determined to be greater than 50000mg/kg.
The dermal sensitization in Guinea pigs, using the closed patch technique, for this product is considered to be not a skin sensitizer.
 
12. ECOLOGICAL INFORMATION
 
No information available.
 
13. DISPOSAL CONSIDERATIONS
 
WASTE DISPOSAL:
All waste materials should be packaged, labeled, and transported in accordance with all national, state/provincial, and local requirements.
 
14. TRANSPORT INFORMATION
 
PRODUCT LABEL: Capture Soil Release Premist
D.O.T. HAZARD CLASS: Non-Hazardous
 
15. REGULATORY INFORMATION
 
CHEMICAL INVENTORY INFORMATION:
This material or all of its components are listed in the Inventory of Existing Chemical Substances under the Toxic Substance Control Act (TSCA)
  • Capture Soil Release Pre-Mist is tough for set-in stains.
  • Simply spray the Pre-Mist on stain to loosen the carpet for cleaning.  Follow by using the Deep Cleaning Powder.
  • Sold in 24 oz. bottles.
  • Ships in 5 - 7 business days.