Due to some manufacturer\'s pricing restrictions, we are not allowed to advertise our best prices online.
Efloors.com Inventory Clearance Sale!Free Shipping On Area Rugs!Free Samples!Yellow Tag Sale Event
You are here: Luxury Vinyl Tile > Armstrong LUXE Plank > Signature Deluxe Plank Better: Kendrick Oak Honey Butter Luxury Vinyl Plank A6836

Signature Deluxe Plank Better: Kendrick Oak Honey Butter Luxury Vinyl Plank A6836

Signature Deluxe Plank Better: Kendrick Oak Honey Butter Luxury Vinyl Plank A6836

Product ID: 128093

Please call 1-888-522-5456.
Click to chat
Approved Subfloor: Concrete, Wood, Vinyl, Hardwood, Ceramic
Carton Coverage: 28 sq ft
Color Group: Yellow
Color Name: Kendrick Oak Honey Butter
Colors: Latte,Pumpkin,Mustard
Description: Luxury Resilient Plank
Dimensions: 48" L x 6" W x 0.135" T
Finish Type: Urethane
Finish Warranty: 30 Years Residential/7 Years Light Commercial
Installation: Glueless Click
Installation Method: Float
Length: 48
Locking: Lynx Technology Floating Lock-Connect
Manufacturer: Signature
Manufacturer SKU: A6836
Size: 6x48
Style Name: Deluxe Plank Better
Thickness: 0.135
Visual: Wood
Where to Install: On, Above or Below Grade
Width: 6



  • Lynx Technology Installation System

The next generation of floating floors!  Easy to install - no expensive tools or messy adhesives required

  • Amazing breadth of design
Offering Traditional, American Exotic and Tropical Exotic visuals with beveled ends and edges
  • Luxurious Resilient Flooring
        Armstrong Luxe Plank Better combines beauty that will last with impressive performance - backed by a 30 year residential and 7 year light commercial warranty
LUXE PLANK and the Lynx Installation System
THANK YOU FOR CHOOSING ARMSTRONG® FLOORING.  Properly installed and cared for your new flooring will be easy to maintain and will keep its great look for years.  If you have questions or comments, please call our Customer Relations and Technical Services at 1.800.233.3823.




LUXE PLANK Lynx technology with overlapping pressure sensitive adhesive. Planks are bonded to each other, not to the substrate.
These existing in-place products may contain asbestos fibers and/or crystalline silica.  Avoid creating dust.  Inhalation of such dust is a cancer and respiratory tract hazard.  Smoking by individuals exposed to asbestos fibers greatly increases the risk of serious bodily harm.  Unless positively certain that the existing in-place product is a non-asbestos-containing material, you must presume it contains asbestos.  Regulations may require that the material be tested to determine asbestos content and may govern removal and disposal of material.
See current edition of the Resilient Floor Covering Institute (RFCI) publication Recommended Work Practices for Removal of Resilient Floor Coverings for instructions on removing all resilient floor covering structures or contact your retailer or Armstrong World Industries, Inc. 1.800.233.3823.
The floor covering or adhesive in this package does NOT contain asbestos.
General Information
The Lynx installation system allows the planks to be bonded together by an overlapped edge method.  The planks are not bonded directly to the subfloor and this will help hide some minor substrate irregularities without telegraphing through to the face of the planks.  The planks should be installed 1/8" away from all vertical surfaces such as walls, cabinets, pipes, etc. (a larger gap could cause excessive floor movement).  When installed in bathrooms, the gap should be filled and sealed with a good quality siliconized or acrylic caulk.  The gap will then be covered with molding or wall base.  Base cabinets should not be installed on top of the planks.
Included in each carton are two Luxe Plank transition strips.  These can be used to change direction during the installation process or to make repairs as discussed in the Repair Procedure instructions.
Keys to Successful Luxe Plank Installation
Most installations will need approximately 10% cutting allowance added to the square footage of the room. 
Proper conditioning of both the jobsite and flooring is necessary.  Luxe Plank should not be exposed to sudden changes in temperature or moisture/humidity. 
Store, transport and handle Luxe Plank so as to prevent any distortions.  Store cartons flat, never on edge.  Distortions will not disappear over time.  Insure that the planks are laying flat at time of installation. 
Do not compress the edges of the floating installation in any way when installing other flooring materials next to Luxe Plank.  Installation of carpet, metal strips and other transition moldings should not push fullness into the flooring and should allow for some slight movement wherever practical.
Protect the floor from heavy rolling loads, other trades and replacement and/or movement of appliances by using sheets of plywood or similar.
Suitable Substrates
All substrates listed must be properly prepared and meet certain requirements.  There may be other exceptions and special conditions for these substrates to be suitable for the Lynx Installation System as noted below.  (Refer to the Subfloors and Underlayments section of the Armstrong Guaranteed Installation System manual, F-5061, for more details)
Concrete- dry and smooth all grade levels
Suspended wood subfloors with approved wood underlayments - must have minimum of 18" well-ventilated crawl space underneath
Suspended hardwood flooring that is fully adhered, smooth and square edge without texture
Single-layer, fully adhered, existing resilient floors - must not be foam-backed or cushion-backed
Ceramic tile, Terrazzo, Marble
Polymeric Poured (seamless) Floors
Particleboard or waferboard
Single-layer wood subfloors*
Existing resilient tile floors that are below grade
Existing cushion-backed vinyl flooring
Hardwood flooring that has been installed directly over concrete
On stairs, or in rooms with sloping floors or floor drains
*Installation directly over a single-layer wood subfloors in new construction is not recommended.  New construction should have additional underlayment on top of the subflooring and be installed as late in the building schedule as possible; after permanent HVAC is running, the home is properly conditioned, and other trades have completed their work.
If it is unavoidable to install over single-layer wood subfloors, it should only happen in remodel work where the home has been occupied and conditioned for a minimum of 1 year, having gone through the initial winter season and dry-out of the new home.  The subflooring must meet all the substrate requirements noted below.
Job Conditions/Preparations
All substrates must be structurally sound, dry, clean, flat, and smooth with minimal deflection.  Substrates must be free from excessive moisture or alkali.  Remove dirt, paint, varnish, wax, oils, solvents, other foreign matter and contaminates that could cause staining or interfere with the bond of the adhesive.
High spots on the substrate should be leveled and low areas filled with appropriate underlayments.
Do not use products containing petroleum, solvents or citrus oils to prepare substrates as they can cause staining and expansion of the new flooring.
In renovation or remodel work, remove any existing adhesive residue so that 100% of the overall area of the original substrate is exposed.
When installing over an existing resilient floor, use S-199 One-Part Embossing Leveler or S-194 Patch, Underlayment & Embossing Leveler/S-195 Underlayment Additive to fill and smooth any embossing in the old floor.
The area to receive resilient flooring, flooring materials and adhesives should be maintained between 65° F (18º C) and 85º F (29º C) for 48 hours before installation, during installation and 48 hours after completion.  Maintain temperatures between 55º F (13º C) and 85º F (29º C) thereafter.
Resilient flooring should only be installed in temperature-controlled environments.  It is necessary to maintain a constant temperature.  Therefore, the permanent HVAC system must be in operation before the installation of resilient flooring.  Portable heaters are not recommended as they may not heat the room and subfloor sufficiently.  Kerosene heaters should never be used.
For concrete subfloors, the water vapor emission level should be 5 lbs./1000 sq. ft./24 hours, or less, as determined by calcium chloride testing.
Radiant heated substrates must not exceed a maximum surface temperature of 85° F (29º C).
Luxe Plank should not be exposed to direct sunlight for prolonged periods.  It can result in discoloration and excessive temperatures that may cause expansion.  The use of drapes or blinds is recommended during peak sunlight exposure.
Remove baseboard, quarter-round moldings, wall base, appliances, and furniture from room.  For best results, door trim should be under-cut to allow flooring to move freely without being pinched.  After preparation work, sweep and vacuum the entire work area to remove all dust and debris.
Note:  Planks are easily cut with a tile cutter or by using a straight edge and utility knife.  Score the face of the plank several times and snap it.  If it doesn't separate, lightly cut through the back on the fold mark.
Whenever possible, plan the layout so that the joints in the planks do not fall on top of joints or seams in the existing substrate.  The end joints of the planks should be staggered a minimum of 6" apart.  Do not install over expansion joints.  Determine which direction the planks will run.  Find the center of each of the end walls (the walls perpendicular to the long dimension of the planks) and place a pencil mark on the floor.  Connect these points by striking a chalk line down the center of the room.  Do a dry layout of planks from the center line to the wall running parallel to the long direction of the planks to determine the width of the last row of planks.
Fig. 1 - Dry Layout to determine width of border plank
Avoid having border pieces less than 2-1/4" (5.7 cm) wide for the 4-1/2" (11.4cm) wide planks and less than 3" (7.6 cm) wide for the 6" (15.2 cm) wide planks.  If you find the border planks will be less than 1/2 the width of the plank, the center starting line should be shifted a distance equal to 1/2 the plank width.  This will "balance" the room and provide for a larger piece at the wall.
Most installations will start along the longest, straight wall in the room.  The planks will be installed starting in the corner of the room on the left side of the starting wall (as you are facing it).  The bottom overlap film should be exposed on the side and end of the plank facing away from the left corner of the starting wall (Figure 2).  Remove the paper release liner exposing the adhesive on the bottom overlap film.
Note:  The pressure sensitive adhesive has a long working time after the release paper has been removed.  It must, however, be protected from dust and debris after the release paper is removed and until it is covered with another plank.  If the job is stopped prior to completion, leave the release paper intact on the long edge only, of the last row of planks.  This will prevent dust or traffic from other trades from interfering with the adhesives performance.
Fig. 2 - Left corner of starting wall
CAUTION - Do not stand or walk on release paper liner, as it is extremely slippery.  Place it in a wastebasket immediately upon removal from plank.
Begin laying the first row of planks.  Place the top overlap on the exposed bottom overlap film (with adhesive) of the preceding plank.  Press into place to obtain adhesion.  Use a hand roller if available, or, rub the seam with moderate hand pressure using a clean dry cloth.  Neatly butt the plank face edges together.  Continue, left to right, with the first row of planks until you near the end and need to cut the last plank to fit.  Try to avoid having planks shorter than 8" at the end of the rows.  You may have to cut some additional length off the starting plank and slide the first row toward the left so the last plank will be at least 8" in length.  Remember to leave a gap 1/8" from the end wall and cut the last piece in that row to fit.
Start the second row on the left side with a piece cut to about 2/3 the length of the starting plank in the first row.  It is important to keep the end joints staggered a minimum of 6" in adjacent rows (Figure 3).  Both the long side edges and the short ends of planks should be neatly butted against adjoining planks and those in adjacent rows.  Use one hand to hold the plank, and the other hand to guide the edges into place by lowering the plank as you go.  It's important to butt the edges together neatly.  Press into place or use a hand roller to obtain adhesion.  If the joints are not right, pull up the plank and reposition it immediately.
Note:  Luxe Plank™ is precisely made to size and squareness.  After the first 3 rows of planks are installed they should be checked with a string line to insure that rows are still running straight.  If they are not, it could be that the starting wall has some irregularities that caused bowing in the installation.  If so, the starting row of planks may have to be scribed and retrimmed to account for any unevenness in the wall.  This can be done without having to disassemble the beginning rows.
Fig. 3 - Stagger end joints by 6", cut pieces at ends of row should be 8" or greater.
Continue installing the remaining rows in similar fashion.  Maintain the 6" minimum staggered end joints between rows and maintain the gap at perimeter and vertical surfaces.  After you have enough rows in place, you may find it easier to turn around and work on top of the newly installed planks for the remainder of the room.
LUXE PLANK transition strips, included in each carton, can be used when changing direction of the installation to return into a closet or alcove area of the room.  LUXE PLANK transition strips are also recommended in the repair procedures for damaged planks (see below).  After the installation is completed, roll the entire floors, in both directions with a 100-pound roller.  Use a hand roller in confined areas where the large roller will not reach, such as under toe kicks.
Finishing the Installation
Replace the molding or wall base, allowing slight clearance between the molding and the planks.  Nail the molding to the wall surface, not through the flooring.  At doorways and at other areas where Luxe Plank may meet other flooring surfaces, it is preferable to use a "T" molding or similar to cover the exposed edge but not pinch the planks.  Leave a small gap between the planks and the adjoining surface.
When replacing appliances, or whenever moving heavy furniture over the flooring, place a wood panel under the object.  Without moving the panel, slide or roll the object over it.  Follow with additional panels as needed.  This prevents scratches, tears or buckling of the flooring material.
Care and Maintenance
IMPORTANT:  Do not wash or scrub the new Luxe Plank flooring for at least 5 days after the installation.  This will allow the planks to become "seated" in the adhesive and prevent excess moisture and cleaning agents from interfering with the adhesive bond.
Proactive Protection for Your Floor
When moving appliances or heavy furniture it is always wise to lay a plywood panel on your floor and "walk" the item across it.  This protects your floor from scuffing and tears.
Use floor protectors, such as Armstrong Floor Protectors, under furniture to reduce indentation.  As a general rule of thumb, the heavier the item, the wider the floor protector needed.
Place a walk-off mat at outside entrances to reduce the amount of dirt brought into your home.  We strongly recommend mats without a latex or rubber backing since these backings can cause permanent discoloration.
All Armstrong floor care products have been specifically developed to care for Armstrong floors.
Caring for Your Floor
Sweep or vacuum regularly, to remove loose dirt which can scratch your floor.  Note:  We do not recommend vacuums that have a beater bar since it can visibly damage your flooring surface.  Additionally, we do not recommend electric brooms with hard plastic bottoms with no padding as use may result in discoloration and deglossing. 
 Wipe up spills as soon as possible.  Never use highly abrasive scrubbing tools on any resilient floor.
Wash your floor regularly with a vinyl floor cleaner such as Armstrong Once ' n Done Resilient & Ceramic Floor Cleaner.
Do NOT use detergents, abrasive cleaners, or "mop and shine" products.  These products may leave a dull film on your floor.
Over time, if the shine on your floor begins to dull, apply Armstrong SatinKeeper Resilient Low Gloss Floor Finish to restore the appearance of Luxe Plank.  Do NOT use paste wax or solvent based polishes.
Vinyl flooring, like other types of smooth floors, can become slippery when wet.  Allow time for floor to dry after washing.
Immediately wipe up wet areas from spills, foreign substance, or wet feet.
Repair Procedure for damaged bottom overlap film on plank prior to installation.
If the exposed film with adhesive is severely wrinkled or damaged prior to installation the damaged portion can be removed and replaced with a piece of LUXE PLANK transition strips supplied in every carton.  Sometimes, just bending it in the other direction will allow the film to lay flat enough for normal installation.  If this doesn't work:
Turn the plank over so the back is exposed
Use a utility knife to score through the back film with a straight cut 2 inches from and parallel to the edge of the damaged film.
Make additional cuts to isolate the damaged portion of film from the undamaged areas intact
Cut piece of the Luxe Plank transition strip to the proper length to replace the damaged film
Strip release paper from the LUXE PLANK transition strip and adhere it to the back of the plank in a void where the damage was removed (do not overlap the LUXE PLANK transition strip material on top of the existing film)
Repaired plank can now be installed as normal
For damaged plank after installation
If a plank becomes damaged to the extent that it needs to be replaced, use the following procedure.
Use a sharp utility knife (razor knife) to score down through the joints on all four sides of the damaged plank.  Cut completely through the rigid vinyl film backing on the plank.
Remove damaged planks.
Remove the exposed, L-shaped, bottom overlap film from the replacement plank.  Trim it carefully along the edge of the plank.
Turn the replacement plank face down and use the trimmed film (from step 3 above) to fill in areas on the back of the plank that does not have film on it.  This creates a uniform thickness on all 4 edges of the plank.
Cut Luxe Plank transition strips material to lengths so that it can be inserted beneath adjoining planks on all 4 sides of the opening where the damaged plank was removed.  Remove release paper from the LUXE PLANK transition strip and insert it, adhesive side up, about 1" underneath the surrounding planks.  Do not overlap the LUXE PLANK transition strip material surrounding the opening.
Insert the replacement plank into the opening and bond to the adhesive on the transition strips.  This method will ensure that planks are bonded to each other, not the subfloor, as intended with this floating installation.
Effective as of October 1, 2009
30-Year Limited Residential Warranty for:
Luxe Plank Better

What is covered and for how long?
The Armstrong 30-Year limited residential warranty for Armstrong vinyl plank means that for 30 years from the date of purchase, the floor listed above:
Will not wear through**
Will not contain manufacturing defects.
Will not rip or tear from normal household use.***
Will not bottom-up discolor from underlayment panels (including lauan), as well as alkali, mold or mildew growth.
The edge of the tile/plank will not curl.

**Wear through is defined as loss of the floor design due to normal household use.
***We recommend using floor protectors.  As a general rule of thumb, the heavier the item, the wider the floor protectors should be.

Luxe Plank Better

For light commercial installations (example:  common areas in multi-unit dwellings and low-traffic retail shops) the product is warranted to be free from manufacturing defects and will not wear through the printed image for 7 years from date of purchase.  If a defect covered by this warranty is reported to Armstrong in writing with 7 years of purchase, Armstrong will supply new material of the same or similar grade sufficient to repair or replace the defective material.

This warranty applies to floors purchased after October 1, 2009.