Material Safety Data Sheet
Capture Spot & Stain Remover
1. PRODUCT AND COMPANY IDENTIFICATION
Product Identification
Product Name: Capture Spot & Stain Remover
CAS Number: Blend
Company Identification
Milliken Chemical
P.O. Box 817
1440 Campton Road
Inman, SC 29349 USA
1-864-472-9041 (For questions and emergencies)
1-800-424-9300 or 1-703-527-3887 (CHEMTREC)
PRODUCT USE:
Cleaner
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW:
Prolonged or repeated contact may cause skin or eye irritation.
HFRP Rating:
Health - 1
Flammability - 0
Reactivity - 0
Personal Protection Index - B
EYE:
May cause slight irritation.
SKIN:
Prolonged or repeated skin contact may cause irritation.
INHALATION:
No known risks due to inhalation.
INGESTION:
No known hazards when used according to container instructions.
3. COMPOSITION / INFORMATION ON INGREDIENTS
| Chemical Name |
Amount |
CAS Number |
| Proprietary Blend |
100.0% |
Blend |
| |
|
|
|
|
|
|
4. FIRST AID MEASURES
EYE CONTACT FIRST AID:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops or persists.
SKIN CONTACT FIRST AID:
Get medical attention if irritation develops or persists.
INHALATION FIRST AID:
Although this product is not known to cause respiratory problems, if breathing is difficult, remover to fresh air and provide oxygen. Contact a physician.
INGESTION FIRST AID:
Contact a physician. Do not induce vomiting.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES:
TCC Flash Point: > 100.0 C (>212.0 F)
Autoignition Temperature: N/A
FLAMMABLE LIMITS IN AIR:
LEL: %
UEL: %
EXTINGUISHING MEDIA:
Water, carbon dioxide, foam or dry powder.
FIRE & EXPLOSION HAZARDS:
No Known unusual hazards in a fire/explosion situation.
FIRE FIGHTING INSTRUCTIONS:
As in any fire, wear self-contained breathing apparatus pressure-demand MSHA/NIOSH (approved or equivalent) and full protective gear.
6. ACCIDENTIAL RELEASE MEASURES
SAFEGUARDS (PERSONNEL):
Wear appropriate personal protective equipment.
SPILL PROCEDURE:
Contain spilled material. Large spillage should be dammed-off and pumped into containers. All waste materials should be packaged, labeled, and transported in accordance with all national, state/provincial, and local requirements.
INITIAL CONTAINMENT:
Contain spilled material. All waste materials should be packaged, labeled and transported in accordance with all national, state/provincial, and local requirements.
7. HANDLING AND STORAGE
HANDLING (PERSONNEL):
Wear appropriate personal protective equipment. Wash hands thoroughly after handling.
STORAGE PRECAUTIONS:
Keep from freezing. Keep container closed to avoid contamination.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS:
Good general ventilation should be sufficient to control airborne levels.
EYE / FACE PROTECTION REQUIREMENTS:
Wear safety glasses.
SKIN PROTECTION REQUIREMENTS:
Wear protective gloves to minimize skin contamination. Wear appropriate personal protective equipment.
RESPIRATORY PROTECTION REQUIREMENTS:
Under normal use conditions, with adequate ventilation, no special respiratory protective equipment is required.
EXPOSURE GUIDELINES:
No information available.
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM: Liquid
COLOR: Clear
ODOR: Mild odor
SOLUBILITY IN WATER: Complete
SPECIFIC GRAVITY: 1.00 (Typical) (Water = 1 )
PH: 8.0 Typical
10. STABILITY AND REACTIVITY
STABILITY:
This compound is stable at ambient conditions.
POLYMERIZATION:
Hazardous polymerization will not occur.
INCOMPATILBILITY WITH OTHER MATERIALS:
Avoid contact with strong oxidizing agents. Keep from freezing.
DECOMPOSTION:
Decomposition may produce fumes, smoke, oxides of carbon and hydrocarbons.
11. TOXICOLOGICAL INFORMATION
No information available.
12. ECOLOGICAL INFORMATION
No information available.
13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL:
All waste materials should be packaged, labeled, and transported in accordance with all national, state/provincial, and local requirements. Uncleaned empty containers should be disposed of in the same manner as the contents.
14. TRANSPORT INFORMATION
PRODUCT LABEL: Capture Spot & Stain Remover (each)
D.O.T. HAZARD CLASS: Non-Hazardous
15. REGULATORY INFORMATION
CHEMICAL INVENTORY INFORMATION:
This material or all of its components are listed in the Inventory of Existing Chemical Substances under the Toxic Substance Control Act (TSCA).