Due to some manufacturer\'s pricing restrictions, we are not allowed to advertise our best prices online.
Efloors.com FREE SHIPPING Sale!Free Shipping On Area Rugs!Free Samples!Yellow Tag Sale Event
You are here: Laminate > Pergo > Pergo Accolade: Claremont Slate 8mm Laminate LF000556

Pergo Accolade: Claremont Slate 8mm Laminate LF000556

Pergo Accolade:  Claremont Slate 8mm Laminate LF000556

Product ID: 73721

Availability: Typically Ships In 5 - 7 Business Days
Regular Price: $3.79
SALE PRICE:
$1.85SQ FT
Carton Price: $37.31
Click to chat
Square Foot Calculator
Sold By:
20.17 SQ FT PER CARTON
Quantity:
SQ FT Carton(s)
Odd-lot Specials
Approved Subfloor: Wood or Concrete
Carton Coverage: 20.17 sq ft
Color Group: Gray
Color Name: Claremont Slate
Colors: Smoke,Olive,Violet
Description: 8 mm Laminate
Dimensions: 47.50" L x 7.60" W x 0.32" T
Finish Type: LusterGard Plus
Finish Warranty: 35 Year Residential
Installation Method: Float
Locking: Glueless Click Together
Manufacturer: Pergo
Manufacturer SKU: LF000556
Planks Per Carton: 8
Style Name: Accolade
Thickness: 8mm
Visual: Tile
Where to Install: On, Above or Below Grade
FEATURES
BENEFITS
  • Easy do-it-yourself Installation System
Dual Locking Click Together installation system with means easy installation - no sweat and no mess
  • LusterGard Plus® Surface Protection
A highly durable finish that gives your floors superior scratch protection while resisting dents, dings and moisture
  • 35 Year Warranty
Backed by the brand you trust, this product has a 35 year warranty against wear-through, stains or fading!
 
ACCOLADE
 
Installation Instructions for 8" Planks
 
For more detailed instructions, see the Pergo Installation Essentials Guide for Laminate Flooring on the Pergo website or call our consumer helpline at 1-800-33-PERGO (1-800-337-3746).
 
Job Site Conditions
It is important for you to review the following building code requirements and maintenance practices that protect homes from excessive moisture exposure.
 
Basement
Walls and floors must be dry.
 
Crawl Space
1 1/2 sq. ft. of vent opening for every 100 sq. ft. of floor space with good cross ventilation.  Ground in the crawl space must be dry and covered with a non-recycled (100% virgin) resin 6-mil (.15 mm) polyethylene film as a vapor barrier; seams overlapped at least 8 inches.
 
Gutters, downspouts and spill-caps must be clean and in good repair.
 
Soil should slope away from foundation at least 1/2 inch per foot for at least 10 feet.  Lawn sprinklers must not direct water toward the foundation.
 
A moisture test is recommended on all concrete subfloors and wood subfloors constructed over a crawl space or basement.  Maximum acceptable moisture reading for wood subfloors is 14%.  Maximum acceptable moisture reading for concrete subfloors is 4.5% or a moisture vapor emission rate of 5 lbs/1000 sq. ft./24 hrs.
 
Important Note:  During a dry season, you may find that you get an acceptable moisture reading even if other job site conditions are not acceptable.  Before installing Pergo floors, you must be sure that your job site conditions, as well as your moisture reading, are acceptable.
 
General Installation Instructions
 
Allow unopened cartons of planks to remain in the room where they are to be installed at least 48 hours (96 hours in drier or very humid climates) prior to installation.  Pergo flooring can be installed over most existing subfloors.  However, carpeting and wood flooring installed on a concrete subfloor must always be removed.  Your subfloor must be clean, dry and level.  Any spots lower than 3/16 of an inch must be filled in with a portland cement based leveling compound and any ridges must be removed.  On all concrete subfloors, including those covered by tile, vinyl, linoleum or sheet flooring, you must use a non-recycled (100% virgin) resin 6-mil (.15 mm) polyethylene film as a vapor barrier.  We strongly recommend the use of Pergo Moisturbloc™ or equivalent as a vapor barrier.  These materials can be purchased through your retailer.  Pergo Accolade features a premium attached underlayment foam.  No additional foam is required. Use Pergo Installation Spacers between the planks and the wall to allow for the required 1/4 inch expansion space (2 spacers placed together, thick side to think side, equal 1/4 inch).  You will need approximately one spacer per square foot of installation area.
 
1.  Undercut the door frame and wall base.  Slide the flooring at least 1/4 inch underneath the frame and wall base.  Also leave a concealed 1/4 inch expansion space under each.
2.  Assemble the first row of planks with the tongue side toward the starting wall.  Insert the tongue into the groove of the end joints and rotate downward.  Keep planks aligned and joints closed.
3.  Use spacers to maintain a 1/4 inch expansion space.
4.  Remove the tongue on the end of the first plank and the tongue along the length of all planks against the starting wall when the starting wall is straight.
5.  If the starting wall is uneven, scribe or draw the contour of the wall on the planks and cut along the pencil line.  Also remove the tongue on the end of the first plank of the first row.
6.  Loose lay the first row of planks approximately 2 feet from the starting wall.  Cut the first plank of row two 32 inches in length and loose lay several full sized planks for row two. 
7.  At a slight angle, insert the tongue of plank 2 into the groove of plank 1 until the laminate edges meet, then press downward until the joint locks.  There should not be any gaps at the joints.
8.  Join the short end of plank 1 to the end of plank 3 while keeping the plank ends perfectly aligned.
9.  Join the short end of plank 4 to the end of plank 2.  There will be a gap on the long joint between planks 3 and 4.  Installation Tip:  Place a weight or carton of planks on the end of the row that you are installing when using this method.  It will keep the installed planks in place.
10.  Raise plank 4 upward approximately 1 inch.  Maintain this angle as you take your hands and press against the long edge of plank 4 until the joint locks.  Use these methods to complete rows 1 and 2 all the way to the opposite wall and to finish the remainder of the floor.
11. Alternate Tap Method of Installation:  Align the tongue into the grooves of the long and short side.  Install the long side first by placing the tapping block no closer than 8 inches from either end of the plank and tap the long side until the joint is closed tightly.  Tap the end joint into locked position.
12.  When there is not enough space to raise a plank at the end of a row, use the pull bar.  Set the plank flat on the floor.  Align the tongue into the grooves.  Use the tapping block to tap in the long joint.  Use the ball bar to tap in the end joint.
13.  Slide the two assembled rows to the starting wall.  Maintain a 1/4 inch expansion space with spacers.  Use pieces cut from the opposite wall to begin the next row or another row always providing at least a 12 inch or greater distance between the end joints from one row to the next. 
14.  Cutting the last row:  Place a full row of planks directly on top of the last installed row of full planks.  Use the full width of a scrap piece of plank.  Place the tongue side against the wall and the pencil against the extended groove and mark a line the length of the wall.  Cut along the pencil line.
15.  When installing around pipes, leave a 1/4 inch expansion space around the pipes.  Use glue to join the cut pieces.  Installing under doorframes:  Assemble the short and long sides using the tapping block and pull bar if needed.
 
 
Pergo Accolade
Limited 25-Year Residential Warranty
 
Pergo, Inc. ("Pergo") provides the following limited 25-year residential warranty to the original purchaser for as long as he or she owns the flooring:
1) The laminate surface will not wear through. 2) The floor will not fade due to sun or electrical light. 3) The floor will not stain. 4) The floor will resist damage from moisture due to damp mopping and everyday spills when removed promptly. 5) The joint will remain secure under normal use conditions.
 
The Pergo Accolade Limited 25-Year Residential Warranty is made subject to the following conditions:

1. The floor must be installed properly in accordance with Pergo installation instructions. The instructions should be obtained through a retailer or at 1-800-33-PERGO (1-800-337-3746)

2. The flooring must be used only indoors in dry, climate-controlled residential areas. This limited warranty does not apply if used in any commercial setting.

3. The flooring must be maintained in accordance with Pergo care and maintenance instructions.

4. Damage must not have occurred as a result of improper or inadequate maintenance or accidents, such as damage caused by scratching, impact or cutting. Damage resulting from the use of a jet mop, spray mop, or similar wet mop with the flooring is not covered by this limited warranty.

5. Surface wear must be readily visible (i.e. approximately 1/2 square inch). Gloss or sheen reduction is not surface wear and is not covered by this limited warranty.

6. This limited warranty does not apply to water damage, including but not limited to water damage caused by flooding, standing water (water that remains on floor longer than 30 minutes), leaking pipes, household mechanical failures, appliance leaks or pet urine.

7. This limited warranty does not apply to damage caused by water or moisture in the subfloor or underneath the flooring, including but not limited to damage from subfloor hydrostatic pressure (water or moisture under the floor that is transmitted to the surface through exerted pressure) or other conditions that result in water or moisture being below the floor.

8. This limited warranty does not apply to flooring installed on a concrete subfloor unless a non-recycled (100% virgin resin) 6-mil. polyethylene film vapor barrier with a density of 0.92 lbs./cubic ft. and a thickness tolerance of +/- 10% is installed over concrete subfloor that emits a water vapor no greater than 5 lbs. per 1,000 sq.ft. within 24 hrs.

9. This limited warranty does not apply to Pergo moldings.
 
10. Installation of flooring that contains any manufacturing defect is not covered by this warranty.
 
Pergo Limited 6-Month Manufacturing Warranty
Pergo provides a limited warranty to the original purchaser for six (6) months from the date of purchase covering any manufacturing defects in the flooring.
 
The Pergo Limited 6-Month Manufacturing Warranty is made subject to the following condition:
The limited warranty does not cover any damage that occurs during the shipment or installation.
 
How to Make Claims:
Any claim under the Pergo Accolade Limited 25-Year Residential Warranty or Pergo Limited 6-Month Manufacturing Warranty must be made by contacting your retailer within 30 days after the basis for the claim is detected.

In addition, any claim under either limited warranty must be made before the end of the applicable limited warranty period. Proof of purchase, including the date of purchase, must be presented to make a claim.

Pergo's Responsibility:
If Pergo accepts a claim under either of these limited warranties, Pergo will repair or replace, at its option, the affected Pergo flooring material only. If Pergo in its sole discretion determines that such repair or replacement is not reasonably achievable, Pergo may choose to refund the purchase price of the affected Pergo flooring material. If the design for which a claim is made is no longer available, Pergo will replace the affected floor materials with another Pergo design of equal or greater value at Pergo's discretion. Upon approval of the warranty claim, Pergo will provide you with instructions on the manner in which to proceed in order to have your flooring repaired or replaced, and you must comply with such instructions within ninety (90) days after the claim is approved or your rights under the limited warranty will be deemed waived. The above remedies are the sole and exclusive remedies for claims on this product.
These limited warranties give you specific legal rights, and you may also have other rights which vary from State to State.
 

DISCLAIMERS:

PERGO DISCLAIMS ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THIS PRODUCT
Pergo disclaims liability for incidental and consequential damages. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
These limited warranties are not transferable. They extend only to the original end-consumer.
Samples, descriptions, and other information concerning the product contained in catalogs, advertisements, or other promotional material or statements made by sales representatives or distributors are for general informational purposes only and are not binding upon Pergo. No sales representatives or distributors shall have any authority whatsoever to establish, expand or otherwise modify Pergo's warranties.
The provisions of these limited warranties are deemed to be severable and the invalidity or unenforceability of one provision shall not affect the validity or enforceability of any other provision.
These limited warranties constitute the entire agreement of the parties, and no waiver or amendment shall be valid unless in writing and signed by an authorized representative of Pergo.